Every year in September, October is the harvest razor clams peak season, whether it is a coastal region, or artificial breeding area of razor clams size processing points are busy up.
At present, our country razor clams the cleaning, the drying link basically realizes the mechanization, but razor clams's capture, the shell stripping process still needs to consume a lot of labor force, and the production efficiency is low, the cost is high. Razor clams has a long history in China, Fujian province, Zhejiang Province, the production of more abundant, and artificial breeding. Razor clams meat can be fresh food, can also be processed into clam dry, razor oil and so on. We know that clam dry processing needs to go through the cleaning, drying process, the equipment involved include washing machine, drying machine. Today, the market has been dedicated to razor clams, raw oysters, oyster, scallops and other seafood cleaning machine, the machine uses advanced nylon brush wire, wear-resistant, can be razor clams spit and surface mud sand quality, sand mud and soft mud clean up, material clean high out of artificial conventional washing method more than twice times.
At the same time, the washing machine has a circulating filter system, through the circulating water tank can be recycled, improve the cleaning efficiency, water saving rate of more than 60%. For the razor clams drying process, compared to the traditional natural drying, simply razor clams on the cement floor specifically paved, the application of heat pump dryer not only improve the drying efficiency, solve the problem of output instability caused by the weather, but also to ensure the quality of clam, to avoid the external environment caused by microbial pollution, prolong the shelf life.
It is worth mentioning that the heat pump dryer can not only save energy, but also reduce the emissions of pollutants such as CO2, to achieve the effect of energy saving and emission reduction. In general, razor clams cleaning, drying the basic realization of mechanization, automation, but the capture, stripping Link has not been realized. Digging razor Clams is a manual work, but also need small skills, unskilled people busy half a day, tired waist acid back pain, perhaps nothing. According to razor clams capture personnel introduction, generally speaking, razor clams are hidden in a deep cave, digging before fishing with a shovel shovel open half a depth of silt, when the razor clams exposed hole, you can use the pre-prepared sea salt sprinkle in the hole, then razor clams out from the hole ' tentacles ' and half of ' body ', then need sighted, hurry to catch, otherwise instantaneous
will also be drilled into the sand. I understand that the current razor clams fishing mainly rely on artificial, but also failed to achieve machine replacement, coupled with the skills, professional workers difficult to recruit and labor costs greatly increased, making the enterprise labor costs increase, and production has been on the embarrassing situation.
It is learnt that a skilled worker at most at the most can dig about 100 kilograms, more than 10 capturing workers even 4 hours, even an acre of beach are digging not finish, time consuming, cost increases. In fact, not only to catch razor clams need to rely on artificial labor, stripping razor clams also consumes a lot of labor. Because of the difficulty of fresh razor clams, only a small amount of fresh products into the market, more needs to cook, hand-peeled, and finally the razor clams meat drying, so that it becomes dry seafood. This process seems simple, but it needs to consume a lot of labor, such as JuJube Village 2 Group A common razor clams processing point, one day there will be nearly 200 people participate in it.
Even the specially skilled stripping razor clams worker One second, barely one hour to peel three barrels of more than 3,000. According to the industry, a razor clams capture device appears on the market, mainly to put the device's vibration system in the razor clams life of the cave, triggering the razor clams of dangerous senses to force it out, which is a good solution to the traditional use of a hook with hooks one of the hanging out of the razor clams, capturing the problem of low efficiency.
In addition, do not destroy the living environment of razor clams, such as some equipment is the razor clams and sand in the whole excavation, and then separate, this will have a certain impact on the environment. In a word, whether it is the food and beverage processing industry, or the aquatic industry, many processes are gradually replaced by machines, both to save labor, improve production efficiency, but also to avoid the manual operation brought about safety, health problems, to ensure product quality and safety, but, razor clams capture, stripping the shell link is still not realized mechanization.