Iskar introduces the new concept of the multi-function milling cutter TOR-6-MILL, which can hold four different shapes of blades. Isca introduces the new concept multi-function milling cutter TOR-6-MILL, which can hold four different shapes. The new TOR-6-MILL milling cutter and insert design is more versatile, especially suitable for the mold industry, turbine blade machining and general machinery.
TOR-6-MILL milling cutters are available in the following configurations: TR6 ER – End mill diameters from 16-32 mm; TR6 ER-M – FLEXFIT modular threaded multi-function end mill heads, diameters from 16-35 mm ;TR6 FR – face milling cutters range in diameter from 40-80 mm.
In order to optimize the machining results in different applications, the following four shapes of milling inserts are available: Double-sided milling inserts TR6 TNCU/MU 0702 and TR6 TNCU/MU 1004 with 6 rounded cutting edges, corner radius The values are 0.5-1.5mm and 0.5-3.0mm respectively, the large positive rake angle, the surface quality of the machined workpiece is high, the milling cutter can also be used for root cleaning; the single-face milling cutter TR90 TXMT 0702 and TR90 TXMT 1004 with three cutting edges For 90° lead-angle shoulder milling, the corner radius of the tool tip is 0.4 mm and 0.8 mm respectively, the maximum cutting depth is 2.5 mm and 4 mm respectively; the single-face milling cutter TRFF TXMT 0702 and TRFF TXMT 1004 have three Cutting edge for large feed milling, mounted on the body to form 18° and 17° lead angles respectively, with a maximum depth of cut of 0.6 mm and 0.8 mm respectively, with ramping and milling capability, programming radius of 1.0 mm and 1.4 respectively Mm; single-sided milling insert TR45 TXMT 1004 with three cutting edges, mounted on the body to form a 45 ° lead angle, universal milling cutter for face milling and chamfer milling, the maximum depth of cut is 3mm.
In addition to the 45° lead angle milling cutter, the nominal diameter of the milling cutter remains the same after the milling cutter has replaced the remaining milling inserts. The milling cutter body is specially polished, hard coated to protect it, and has higher corrosion resistance. Abrasion resistance. Coolant flows through the inner cooling through hole to each cutting edge. TOR-6-MILL milling inserts use Isatech's cutting edge technology (SUMOTEC) alloy grade to ensure high productivity