A friend was particularly frustrated to find a small editor, saying that he chose to install an air conditioner, which was especially suitable for his new home. However, it was not long before the installation of the air conditioner wall appeared a small crack, occasionally The air conditioner is still leaking, making her miserable.
Many people buy air conditioners only pay attention to the details of the air conditioner itself, but ignore the problems during installation. For example, can the air conditioner be installed on a non-load-bearing wall? Maybe many people are not clear. Today, ask for the truth to answer the air conditioner installation. problem.
Find the load-bearing wall of your home
Can the air conditioner be installed on the non-bearing wall?
If it is not a load-bearing wall, the user will find that after the installation of the air conditioner, there will be small fine lines on the wall, which may not affect the use of it, but there is a crack in the house. It is also a comparison in the heart. Uncomfortable, of course, the most important thing is safety considerations. In the final analysis, air conditioning is best installed on the load-bearing wall.
The best installation effect of the indoor unit
If the wall is a gray wall, the wall can be painted and decorated to enhance the insulation of the gray wall, which saves electricity. The installation position of the air conditioner should be higher, and some families install the air conditioner on the window sill. This is not conducive to reducing the operating rate. Because the cold air is deeper, it will go down. The hot air will go lighter. The lower air in the room is hot and cold mixed air. The upper layer in the room is the air with higher temperature. The higher the air conditioning position. The higher the temperature of the extracted air, the higher the efficiency. However, the general installation height is not higher than 2 meters.
The air-cooled air from the indoor unit should flow through the main place of people's activities, and the indoor air can be kept in good circulation. There are no obstacles in the vicinity of the air outlet of the air inlet to obstruct the air circulation. Consider the interior decoration and coordination again. The air conditioner in the bedroom is installed. Relying on the free position of the bed, avoid blowing directly at night when sleeping, causing a cold or physical discomfort. When the person is sleeping, the pores of the sweat open, the respiratory system is not fortified, the window in the room is slightly opened, and the air conditioner is blown evenly. Cold wind.
The outdoor unit is not sloppy
First of all, to ensure that the installation is on a stable, sturdy wall, the air inlet and outlet should be kept open, and it is better to keep more than one meter away from the TV and other electrical appliances to avoid mutual interference. Another thing to note is not to put indoors. The machine is installed too close to the outdoor unit, which is easy to cause resonance and the noise will increase.
In addition, it is impossible to completely follow the advice of the installation master. The diagram is convenient for changing the external environment, such as removing the iron railings or blinds fixed by the outdoor unit, which will cause the beautiful appearance of the community, and will also cause the outdoor unit to lose a protection. Near the doorway, try to install it in a place without sunlight. The orientation of the outdoor unit is preferably north or east, because the solar radiation in the northeast is small, which is good for air conditioning.