Electrostatic spraying of auto parts painting line can reduce paint waste and over-coating, so it can reduce the cost of cleaning and waste paint management. Compared with traditional work, disc DISK automatic electrostatic coating process saves 30-60 % paint. Quality improvement of auto parts painting line: Due to the electrostatic repulsion, the paint particles are well atomized and ultra-fine, so it is easy to achieve high standard surface quality when performing advanced paint work, and the problem of stable finished product quality There are chapters to follow.
Regarding the large-volume active delivery of auto parts painting line, it is necessary to carefully check whether it is leaking, thin or partially rubbing before entering the drying tunnel. If unqualified parts are found, it should be avoided to enter the drying tunnel. It is possible to remove the heavy spray. If a single workpiece fails due to thin spray, it can be re-sprayed and solidified after curing the drying tunnel.
Impeller cleaning of the fan of the automobile parts painting line: On the monthly equipment maintenance day, the equipment manager loosens the fastening screw with a wrench, and the spraying operator uses the scraper to remove the industrial paint on the impeller, and the impeller is buttered; Good impeller, and tighten the fastening screws. Usually every other month.
Cleaning of automobile parts painting line windshield: When the equipment is being maintained every Saturday, the user of the equipment removes the windshield, scrapes off the paint on the board with a spatula, washes it with water, and dries it with butter.
Cleaning of the spray nozzle of the auto parts: When the equipment is being maintained every Saturday, the user of the equipment removes the nozzle, and the equipment manager removes the water pipe. The paint in the pipe is required to be cleaned, and the residue in the pipe is cleaned with water. , install a good water pipe, nozzle. The opening of the nozzle is on one side.
Cleaning and maintenance of the auto parts painting line pump: On the monthly equipment maintenance day, spray the water in the fuel injection cabinet, the equipment manager loosens the screws, removes the water pump; cleans the paint residue on the clean impeller and the water channel wall After the paint remains, install the fastening screws.
Auto parts painting line water tank cabinet inner wall cleaning: The user of the equipment connects the water pipe to the water supply pipe, and opens the water switch to wash the water from top to bottom.
