From May 28th to 30th, 'Beijing International Road Transport, Urban Bus and Parts Exhibition' was held in Beijing.
As an important exhibition for the road transport industry, the Road Transport Exhibition has always been a stage where various vehicle companies and parts suppliers compete on the same platform. At this year's Road Transport Exhibition, Suzhou Lukong Drive Technology Co., Ltd. (hereinafter referred to as the “Green Drive” ') Shows pure electric, hybrid and other products. From mixing to pure electricity, the development of the green-controlled transmission has attracted much attention from the industry.
Deputy General Manager of Green Control Drive Hong Siming
Star products show off
At this road transport exhibition, Green Control Drive brings both pure electric and hybrid products, including TED series products based on AMT pure electric systems, pure electric direct drive systems DM series products, and enhanced hybrid hybrid systems MHD series product.
TED series products are currently the main products of the green control drive. According to reports, this series of products are driven by the permanent magnet synchronous motor, AMT automatic transmission is connected with the motor coaxially; the use of the characteristics of transmission speed increase torque, to achieve a smaller matching motor to achieve Direct drive large motor effect; At the same time, make the vehicle has more adaptability and higher efficiency. At present the sales volume of this series of products has exceeded 10,000 sets, has been widely recognized by customers.
'This set of products is an advantageous product in the market, and is also a superior product of the Green Control drive.' Vice President of Green Control Drives Hong Siming said in an interview with a reporter from China Automotive News that the current pure electric drive products on the market are driven directly. Mainly, last year's data showed that the drive products with gearboxes were less than 30%. The drive products with gearboxes from Green Control Drives have significant advantages. Not only are they lighter in weight, they are more efficient, and their climbing ability is more important. After the performance was improved, the cost did not increase.
The TED2860 pure electric system launched in 2017 has a maximum output torque of 2860Nm, a maximum climbing rate of more than 25%, and a hundred kilometers of power consumption is about 5% lower than that of a direct drive. The weight is only 180kg, which is 40% more than direct drive weight reduction. This product is suitable for 10 to 12 meters of buses and 9-10 meters of road vehicles. According to reports, the product is currently in Guangzhou, Shenzhen, Zhuhai, Nanjing, Ordos, Baotou, more than 3,000 vehicles in more than 3,000 new energy vehicles Operation.
The Enhanced Hybrid Hybrid System MHD series products are also attracting much attention during the exhibition. This series of products rely on mature and stable AMT key technologies. In addition, a single TM motor is added on the basis of single-motor parallel connection. Series, parallel, or a combination of the two to drive the vehicle. Currently, it has passed 1,000 batches of market verification. The accumulated operating mileage exceeds 100 million kilometers and the attendance rate is over 98%. It has strong power, high efficiency, energy saving, and safety and reliability. Advantages: Specifically, the product's maximum climbing grade can reach 30%, 8% of the slope can achieve 40km/h continuous driving speed; oil saving rate can reach up to 64%; using dual motor plus AMT program, according to torque demand Efficient distribution of power; design life of 500,000 kilometers; multiple modes of protection, improve the vehicle's ability to continue operations.
'Green Control Speed' is amazing
From the original hybrid king to today's pure electric drive leader, in the field of new energy transmission, the speed of the development of the green control drive has been praised.
At the end of 2011, Green Control Drive was established; by 2013, Green Control's hybrid and pure electric products were listed one after another. Its domestic first AMT-based parallel hybrid product broke the monopoly of foreign companies and was widely praised by customers. In 2015, the green control R&D center covering 80,000 square meters was put into use. With outstanding technical advantages, Green Control has developed into an R&D integrated company. By 2017, Green Control will form 6 major products such as PHD, MHD, TED, and DM. Series, covering all kinds of pure electric models ranging from 1-2 tons to 55 tons, and hybrid models from 8.5 to 12 meters; and fully realized the self-control of motors and gearboxes, and developed into a dual-wheel drive of 'development + manufacturing' Integrated enterprise.
Every year, there are new changes and great changes. Under the vigorous development of China's new energy automotive industry, Green Control Drive has also achieved self breakthrough and surpass.
In response, Hung Siming pointed out that the main business of Green Control Drive is the development, production and sales of AMT automatic transmissions, new energy automotive drive motors, pure electric and hybrid powertrains. The goal is to develop into a new energy automotive industry. Leading driver products and vehicle power system solutions and service providers.
At present, the annual sales volume of Green Control Drives reaches 20,000 units and the products cover over 300 cities. In terms of product planning, Hong Siming stated that the future development will focus on new energy vehicle drive systems, and take advantage of the integration of mechanical and electrical control to promote the industry. Development. In terms of passenger vehicles, Green Control Drive shall ensure the status of the mixed industry, continue to innovate, lead the development of the industry, and further increase the investment in pure electric power to gradually increase the status of the industry with differentiated products.
In the field of trucks, we must gradually use the advantages of pure electric products to lead the industry.
In recent years, subsidies for new energy markets have gradually begun to decline, and market competition has become increasingly fierce. In this environment, it stands to benefit from the clear development logic and precise control of the market. Technical solutions, corresponding cost control capabilities, first-class management system, excellent product quality. 'Hongsi Ming said.
Further increase pure electric market share
'In 2018, our goal is to further deepen the pure electric market segmentation to increase market share.' Hong Siming stated that in the electric bus market, Green Control plans to increase its market share from 10% to 15%. In the hybrid bus market , maintain a market share of nearly 40%. In the special car market, achieve a market share of 15%. At the same time, increase the truck business layout.
Hong Siming pointed out that in recent years, new energy-related policies have promoted infrastructure construction. On this basis, they can rely on the full development of the market itself to get rid of policy dependence.
From hybrid to pure electricity, Green Control has created a dedicated development model. In the future, the business of Green Control Drive will be expanded from commercial vehicles to passenger vehicles. It is understood that Green Control Drive has started to prepare pure electric passenger vehicle products. After 2 to 3 years of cultivation, it gradually entered the industry. Hong Siming stated that in 2018, the goal of Green Control Drive in the passenger car market was 8,000 to 10,000 units.
In the face of future development, Green Control has full confidence in its transmission. This confidence is largely due to its strong strength. According to reports, Green Control Drive puts 10% of its sales revenue into R&D every year, establishing first-rate domestic product development. Test platform. Has more than 100 sets of advanced test equipment, more than 20 test vehicles, and professional and complete experimental test procedures. Green control drive through full forward development, waterproof, high and low temperature, salt spray, vibration, durability, noise, Inspection tests of 146 kinds of tests, such as vehicle test, have achieved outstanding performance indicators such as product reliability, economy, power, and weight. At the same time, Green Control has created a fast, professional, and efficient after-sales service. System. As of 2017, we provided 1268 times of pre-sales technical consultation, maintenance operation and maintenance training for our customers. We have 232 special service stations, and we have given our service commitments for the normal operation of faulty vehicles within 24 hours.
In recent years, 'Green Control Speed' has brought a lot of inspiration to the industry. From technology, products to management, Green Control Drive has achieved a full range of innovative development. Next, in the fierce competition in the new energy market, Green Control Drive has confidence Create another 'green speed'.