On May 17, China's first production nozzle 3D printer AMSKY AMSK storm S800 product launch was successfully held at the 3rd China Foundry Festival.
As a new star in the foundry industry, AMSK launched the AMSKY Ai Sike Storm S800 (hereinafter referred to as 'Storm S800') as early as the press conference before the press conference, which caused a hot debate in the industry.
As the domestic domestic brand with the first piezoelectric ink-jet printing technology with independent intellectual property rights, ASK always believes that pursuing technological advancement and breakthroughs and pursuing the continuous progress and accumulation of science and technology is an dedication that an industrial technology company should have. In terms of technology research and development, ISKKA has established close cooperation with Peking University, Zhejiang University, Zhejiang University of Technology, Hebei University of Technology and other famous universities in many fields.
In this conference, Professor of Hebei University of Technology, Doctor of Engineering, Master of Tutor, Member of the Expert Library of Additive Manufacturing in the Ministry of Industry and Information Technology of China, Professor Yang Weidong, Vice Chairman of China 3D Printing Industry Alliance, gave a speech. Professor Yang expressed AMSKY The Aikekai Storm S800, as the first domestic production nozzle 3D printer, has a revolutionary significance for the domestic and global 3D printing industry.
(Photo: Professor Yang Weidong)
Under the expectation of many visitors, Mr. Li Mingzhi, Chairman of Guangzhou Aikekai Technology Co., Ltd., unveiled the mystery of AMSKY's Aike Storm S800 sand 3D printer, bringing the first climax of the conference. Then Mr. Li Mingzhi introduced the main parameters of the Storm S800 and the supply of self-produced nozzles, which can be customized, high precision, rapid construction speed, no filter element, six technical advantages of the steel frame, and start the equipment, demonstrating storms for on-site visitors. The real situation of S800 work.
(Picture: Mr. Li Mingzhi reveals ESCAPE Storm S800)
In addition to its advantages in parameters and technology, the Aikesky Storm S800 has a deeper meaning in the sand 3D printing equipment industry in China. For 3D printing, the transformation and upgrading of the foundry industry and core technologies, Hebei University of Technology Professor, Executive Vice President and Secretary General, Tianjin Foundry Association, Prof. Liu Jinhai, Member of the Casting Technical Committee of the National Foundry Society, and Founder of the '3D Printing Joint Laboratory' of Shijiazhuang Tiedao University, Professor Qi Haibo, Director of the Foundry Association of Hebei Province, issued a unique opinion .
(Figure: Storm S800 Sand 3D Printer Parameters)
At the same time, Mr. Li Mingzhi also stated at the scene that ASK is expected to launch the storm S4000 sand 3D printer within one year. It has 18s/layer speed, one-pass printing technology, and friends who are interested in 3D printing equipment. Excited, looking forward to its coming out.
(Figure: Storm S4000 Sand 3D Printer)
Prof. Liu Jinhai believes that the Aikekai Storm S800 has broken the technical barrier and made the piezoelectric ink jet print head technology of the 3D printing industry no longer subject to foreign countries. It is a very memorable event. The print head of the Storm S800 and its electricity The control drives are independently developed by ASK and its CFD and other calculation methods optimize the core components. The actual sand treatment can meet the requirements of energy saving and emission reduction, and at the same time reduce the expenditure cost of consumables. mature.
(Figure: Professor Liu Jinhai)
In addition, for the commercial application of the storm S800 Sand 3D printer, Professor Qi Haibo believes that the sand 3D printing technology is one of the representative technologies for non-molding precision molding, but because the core technology is monopolized by foreign companies and the cost is high, Aishakai overcomes technical difficulties and solves the cost problem of 3D printing equipment.
(Figure: Professor Qi Haibo)
In the reporter’s question session, Mr. Li Mingzhi, on behalf of Aishikeki, stated that ASK is a new member of the foundry industry and hopes to contribute to the commercialization of 3D printing technology and the development of China’s smart manufacturing industry.
(Figure: Mr. Li Mingzhi answered reporters)
Since its founding in 2006, ASK has been carrying out in-depth research and development in the core technology field of industrial printing with the original intention of 'printing the dreams to be true'. For more than ten years, ISKKA has completed its own step by step in the development of its time. The change of growth has also brought infinite surprises to China's 3D industrial printing industry. By leveraging on the wave of 'Made in China 2025', leveraging the broad development prospects of domestic 3D printing, ASK will further deploy the 3D printing industry. Expand the brand's international influence.