Intel Optane technology has been used in various product lines, from memory acceleration to consumer-grade SSDs to data center SSDs, Intel is also constantly improving and upgrading.
For the high-end desktop market, Intel provides the Aodan SSD 900P, based on its own master SLL3D, supports PCI-E 3.0 x4, seven channels, capacity of 280GB (expansion card or 2.5-inch U.2), and 480GB (expansion card) Style, continuous read and write performance 2.5GB/s, 2.0GB/s, random read/write performance 550,000 IOPS, 500,000 IOPS.
According to various indications, Intel is preparing an upgraded SSD 905P , From the number and specifications should only slightly improve and enhance the SSD 900P series, not a whole new generation.
The capacity of the SSD 905P is 480GB (2.5 inch U.2), 960GB (expansion card)Therefore, it does not replace SSD 900P, but it complements the nature, and 3DX Point storage will not be a new generation.
However, the main control is likely to get a certain degree of upgrade. In the case of the enterprise-class SSD DC P4801X, it may be the new SLM58. Because the current main control is too large, it cannot be implemented in the M.2 style, but Intel has previously publicly demonstrated it. The new M.2 style enterprise-class Optimus SSD, is also likely to be the new master.
Intel SSD 905P/900P Specifications
The performance of the SSD 905P has been improved by 5-10%. It has continuously read and write 2.6GB/s, 2.2GB/s, random read/write 575,000 IOPS, and 5.5 million IOPS. At the same time, it has standby and average and burst read/write power consumption. Lower, especially burst read power consumption is almost halved.
There is also, the maximum operating temperature is also increased from 70 °C to 85 °C.
Obviously, these are Master control and firmware optimization results.
The SSD 905P should be released soon, but the previously rumored 1.5TB high-capacity model does not know whether it will come at the same time.
Intel Ao Tang Product Line
