The refrigerator is one of the essential appliances in our daily life, I believe many of my friends are already very familiar with it, but this does not mean that the user will have no doubt when using the refrigerator. Take the refrigerator to carry this thing, it looks like Very simple, the actual handling process involves a lot of small details that are worth noting.
Tape fixing accessories or take out and place
Before handling: Unplug the power plug, cut off the power supply, remove all the food in the refrigerator, fix the refrigerating compartment shelf, moisture boxes and freezer drawers and other moving parts with tape, close the refrigerator door, and fix it with tape to avoid being opened when moving.
Fuselage can not exceed 45 degrees
During handling: When carrying the refrigerator, please pay attention to the inclination of the body can not exceed 45 degrees, To maintain the vertical state of the box, do not invert and horizontal, do not grasp the door handle or drag the condenser to avoid damage .
Because there is a compressor on the bottom in the back wall of the refrigerator, there is some lubricant in the bottom of the compressor and in the casing of the motor. If the refrigerator is lifted or tilted excessively during the transportation, the lubricant will flow into the refrigerator. In the refrigeration system above the compressor and motor, this will cause circulation of Freon within the refrigeration system to be hindered, affecting the normal operation of the refrigeration system. Also, if the refrigerator is placed upside down, it will cause a shock-absorbing spring in the compressor. Unhook, the refrigerator will not work properly.
During transportation, prevent bumps and violent shaking
During transportation, try to prevent bumping or violent vibration, to prevent damage to the compressor and the welded part of the pipeline, causing refrigerant leakage.
Resting after transportation
After transportation: The power must be turned on for at least 2-4 hours to protect the life of the compressor. After the compressor is moved, the refrigerant in the cooling pipe will shake and the impurities in the refrigerant must be allowed to settle. , Otherwise, the compressor will block the high and low pressure valves when it sends out the cooling liquid, which will cause the cooling effect to drop. After turning on the power for half an hour, it will put things into the refrigerator again, which is good for maintenance!
Keep away from heat sources, where humidity is low
The refrigerator should be placed away from heat sources and away from direct sunlight. Because it needs to exchange heat with the outside world during work, the heat is dissipated to the outside through the condenser. The higher the ambient temperature is, the slower the heat dissipation will make the refrigerator work longer and increase. Power consumption, poor cooling effect. It should also be placed in a place with low humidity and ventilation. As the refrigerator housing, condenser and compressor are all metal materials, if the air humidity is too high, these components will rust and shorten the refrigerator. Lifetime. At the same time moist and overheated environment, will cause the refrigerator surface condensation, affecting electrical performance.
Because of the large size and heavy weight of the refrigerator, many refrigerators can cause headaches when transported. If it is damaged during handling, it will affect the normal operation of the refrigerator in the future. Therefore, these details must not be forgotten during the handling of the refrigerator!