With the popularity of mining, the price of graphics cards continues to rise, and the price is very unstable. The supply is also intermittent, so that the players who want to install will be taken for granted. With the release of AMD Ruilong 5 2400G, the DIY market is again Injecting fresh blood, the player who has certain requirements for game quality and performance has another alternative channel.
According to previous tests, it can be seen that the CPU performance of the AMD Reynolds 5 2400G is basically the same as that of the overclocked version of the R5 1400. The performance of the GPU is particularly impressive. It is easy to crush the Intel Core. Many online games and stand-alone games are available. Can run smoothly in 1080P resolution and medium picture quality.
Like the Ruilong CPU, the performance of the AMD Reynolds 5 2400G is not only that, because it also has full open overclocking, CPU, GPU, and memory without any overclocking restrictions.
Next, we will perform some overclocking experience and test on the AMD Dragon 5 2400G to see how much potential there is to tap.
AMD Rui Long 5 2400G integrates the latest Zen CPU, Vega GPU architecture, which CPU part has 4 cores and 8 threads, clocked at 3.6GHz, can be dynamically accelerated to 3.9GHz, while there are 2MB L2 cache, 4MB L3 cache, GPU Part of the integrated 704 stream processors (the history of the APU), the frequency of 1250MHz, the overall thermal design power 65W.
Enter the overclocking test below. The motherboard used in this test is the MSI B350 Gaming Pro, with dual-channel memory and 2GB of memory for the APU.
However, it should be noted that overclocking is not the same as the benchmark run, there is no uniform result, and hardware constitution, testing environment, overclocking methods are related, the overclocking results here are for reference only, not all.
One, single overclocking experience
In order to facilitate the player's overclocking operation of the Ruilong processor under the Windows system, AMD launched a specially named AMD Ryzen Master The official overclocking software, which can easily adjust the detailed parameters such as frequency and voltage in the desktop state, greatly facilitates the overclocking operation.
↑↑↑AMD Ryzen Master
In the official software, you can visually check the status of the processor and adjust the CPU, GPU, and memory frequency specifications to suit multiple debugging frequencies without having to shut down.
1, GPU overclocking test
First, perform an important GPU test, and then perform an overclocking test on the CPU and memory. In the GPU test, the author will simultaneously overclock the memory.
The AMD R & D 5 2400G has a GPU core frequency of 400MHz-1250MHz. After testing, AMD Ryzen Master can overclock to 1500MHz.
Here's the use of AMD's Sharp 5 2400G's silent frequency, overclocking, and Intel Core i5-8400 performance comparison.
AMD Rui Long 5 2400G frequency data: Memory 2400MHz+GPU 1240MHz
AMD Ruilong 5 2400G Overclocking Data: Memory 3200MHz+GPU 1500MHz
1, Jedi Survival: Battle Royale
↑↑↑ "Absolute survival: Battle Royale"
"Absolute Survival: Battle Royale" is a big game with a wide field of vision. It is a multiplayer game and requires many rendering details. Optimized and turned off.
If special effects are reduced, the rendering of special effects such as trees, grass, and shadows will be greatly reduced. This would be unfair to players who have high picture quality. This is one of the reasons why the game is over-consumed.
↑↑↑Turn on very low quality
The very low picture quality in the fixed scene open game, Intel Core i5-8400 only 13 frames, and AMD Rui Long 5 2400G has been able to lead twice as much in the case of silent frequency, after opening overclocking is stable at 40 frames about.
↑↑↑ Start low quality
Even if the low quality is turned on, the Intel Core i5-8400 has only 10 frame rates and is no longer able to operate normally. The overall picture is extremely stuck. The AMD Dragon 5 2400G can still run smoothly at around 30 frames after overclocking.
2, "CS:GO"
↑↑↑"CS:GO"
↑↑↑ "CS:GO" Game Frame Rate Test
The difference between the two results is within expectation. The AMD Reynolds 5 2400G still leads, and after overclocking, it has approached 90 under high effects.
3, Ghost Action: Wilderness
↑↑↑ "Phantom Action: Wilderness"
"Ghost Action: Wilderness" was developed by Ubisoft Paris Studios and is a military shooting game that supports four-person cooperation or single-player games. Because of its game mode, the picture quality requirements are high and the performance requirements are naturally as high.
↑↑↑ "Ghost Operations: Wilderness" Game Frame Rate Test
In this test, AMD's Reynolds 5 2400G, whether it is silent or overclocking, is also stable beyond the Intel Core i5-8400 processor.
2, CPU overclocking test
AMD Rui Long 5 2400G frequency is 3600MHz, you can use AMD Ryzen Master software overclocked to 4000MHz, multiplier can be directly pulled to 40x.
↑↑↑ Overclocked to 4000MHz
1, CineBench R15
Compared to up to 16 cores in the R11.5 version, the R15 version can support up to 256 logic cores. In addition, the new version also enhances the investigation of shaders, anti-aliasing, shadows, lights, and reflection blur, and the performance of CPU. Detection is more accurate.
↑↑↑CineBench R15 test
After overclocking, the single-threaded and multi-threaded performance of the AMD Reynolds 5 2400G increased by 7% and 5% respectively. At this time, there is still a slight gap compared to the i5-8400, but it is already very close. Consider AMD Reynolds 5 The 2400G GPU core is much more powerful and can completely compensate for this gap.
3, memory overclocking
1, AIDA64
AIDA64 Chinese version is a tool to test software and hardware system information, formerly known as EVEREST. It can provide cpu, disk and memory benchmarks. AIDA64 provides a 64-bit benchmark to measure the speed of the computer to handle various data tasks. Memory and The cached benchmark can be used to analyze the system's memory bandwidth and latency. The processor's benchmark uses MMX, 3DNOW!, and SSE instructions.
It is relatively simple to enable memory overclocking. Select XMP mode in the BIOS and use two 8GB DDR4 memories.
Mute scores
Overclocking results
↑↑↑AIDA64 Memory Speed Test
In the default state of 2400MHz, the read/write speeds are 30,218MB/s for reading, 31,469MB/s for writing, and 28,457MB/s for copying. After overclocking to 3200MHz, all three are up about 30%.
