Recently, there was a big ticket of around RMB 1,000. There were thousands of RMB worth of artifacts, and there were also some people who were more disappointed with the thunder and rain. Here we do not name the criticism. And in these machines, red Mi Note 5 is a wave that can be classified as a compliment. It shows a good value for money. According to our custom, of course, it is necessary to take a look and see if there is any cut corners inside.
Before the beginning, it is still necessary to habitually explain that the dismantling section is launched in cooperation with love-players. There will be some more rich viewing angles. If you want to see the entire dismantling process, you can also go to the Koala after reading. Listen to him over there and take a good look.
The first step is to take the card to accustomedly, red rice Note 5 Cato looks white plastic, but there is still a relatively thin layer of metal inside, here is not considered to cut corners.
The back cover is not fixed with screws or adhesives, and can easily be started along the edge of the edge. It is easy for the old driver Koala to choose the most convenient disassemble tool - nails.
The fingerprint recognition component of the Redmi Note 5 is fixed on the side of the screen assembly, so you don't need to worry about hurting the cable when removing the cover. However, careful dismantling is always a good habit worthy of praise.
The back cover is a common three-stage design for thousands of machines. The middle is a metal frame, and the upper and lower ends use an injection molding process. The back cover is also affixed with a large area of graphite heat sink, which seems to be considered more thoughtful in terms of heat dissipation.
Most of the components on the main board are covered with a metal cover, and the arrangement is relatively neat. First remove the fingerprint identification component and unscrew the fixing screw of the metal cover of the BTB socket position to remove it. After unpacking, it is found that there is a small area under it. The heat-dissipating copper foil, I feel that this heat-dissipating detail is really detailed and can be a little proud.
The next step is to disconnect all kinds of connections that are familiar to everyone, whether it is the BTB interface or the RF line interface. When disconnecting, it is necessary to be careful and not to miss. After disconnecting, you can remove the motherboard. There is no cable connection on the back. Can be directly dismantled.
It must be said that Redmi Note 5 is really conscience in terms of heat dissipation. The back of the motherboard is still using silicone grease and heat-dissipating copper foil. It seems that the heat is not a short board for Red Rice Note 5.
After the motherboard is removed, the position of the bottom sound chamber can be seen. As long as all screws are removed, the sound chamber can be simply removed, and then a small board with a small area can be seen on which Micro USB and 3.5mm audio can be seen. interface.
The rated capacity of the battery reached a huge 4000mAh. In order to plug in such a large battery, the mobile phone has also undergone significant changes in structure. It can be seen that the battery will be slightly higher than the main part of the roll cage.
Dismantling here has actually ended, to show you the details of the Red Mi Note 5's dual camera module and motherboard. The Xiaolong 636 processor has since been officially met with everyone. As for the next one, , it is the memory particles packaged.
If you like to dismantle or like to watch others disassemble the machine to observe the internal structure of the machine, then welcome to pay attention to our iMobile mobile phone home, we will continue to bring everyone more interesting internal dismantling of the machine. As for the next stage, we have to do something. To see what new mobile phones are interesting.
Recently, there was a big ticket of around RMB 1,000. There were thousands of RMB worth of artifacts, and there were also some people who were more disappointed with the thunder and rain. Here we don’t name the criticism. And in these machines, the red Mi Note 5 is a wave that can be classified as a compliment. It shows a good value for money. According to our custom, of course, it is necessary to take a look and see if there are any cut corners inside.
Before the beginning, it is still necessary to habitually explain that the dismantling section is launched in cooperation with love-players. There will be some more rich viewing angles. If you want to see the entire dismantling process, you can also go to the Koala after reading. Listen to him over there and take a good look.
The first step is to take the card to accustomedly, red rice Note 5 Cato looks white plastic, but there is still a relatively thin layer of metal inside, here is not considered to cut corners.
The back cover is not fixed with screws or adhesives, and can easily be started along the edge of the edge. It is easy for the old driver Koala to choose the most convenient disassemble tool - nails.
The fingerprint recognition component of the Redmi Note 5 is fixed on the side of the screen assembly, so you don't need to worry about hurting the cable when removing the back cover. However, careful dismantling is always a good habit worthy of praise.
The back cover is a common three-stage design for thousands of machines. The middle is a metal frame, and the upper and lower ends use an injection molding process. The back cover is also affixed with a large area of graphite heat spreader, which seems to be considered more thoughtful in terms of heat dissipation.
Most of the components on the main board are covered with a metal cover, and the arrangement is relatively neat. First remove the fingerprint identification component and unscrew the fixing screw of the metal cover of the BTB socket position to remove it. After unpacking, it is found that there is a small area under it. The heat-dissipating copper foil, I feel that this heat-dissipating detail is really detailed and can be a little proud.
The next step is to disconnect all kinds of connections that are familiar to everyone, whether it is the BTB interface or the RF line interface. When disconnecting, it is necessary to be careful and not to miss. After disconnecting, the motherboard can be taken down. There is no cable connection on the back. Can be directly dismantled.
It must be said that Redmi Note 5 is really conscience in terms of heat dissipation. The back of the motherboard is still using silicone grease and heat-dissipating copper foil. It seems that the heat will not be the short board of Red Rice Note 5.
After the motherboard is removed, you can see the position of the bottom sound chamber. Just remove all the screws, the sound chamber can be simply removed, and then a small board with a small area can be seen on which Micro USB and 3.5mm audio can be seen. interface.
The rated capacity of the battery has reached a huge 4000mAh. In order to plug such a large battery, the mobile phone has also undergone considerable changes in structure. It can be seen that the battery is slightly higher than the main part of the roll cage.
Dismantling here has actually ended, to show you the details of the Red Mi Note 5's dual camera module and motherboard. The Xiaolong 636 processor has since been officially met with everyone. As for the next one, , it is the memory particles packaged.
If you like to dismantle or like to watch others disassemble the machine to observe the internal structure of the machine, then welcome to pay attention to our iMobile mobile phone home, we will continue to bring everyone more interesting internal dismantling of the machine. As for the next stage, we will continue to dismantle something. To see what new mobile phones are interesting.
