For a long time, there are fewer and fewer mobile phones that can be remembered by design alone. In particular, recently, Xiaobian thinks that there are two mobile phones that have performed well in exploring the next generation of mobile phones. One of them is the now hot vivo APEX. With a near real full screen design and half screen fingerprint unlocking, APEX is really quite concerned. But its real machine is too little, we can only in vivo During the media opening day, he started to experience and send out related experience articles (you can understand the students can turn over our related experience articles). As for the real machine to dismantle, Chen Chen is really unable to do it. ..
The other one is ZTE Axon M. Compared with APEX, Axon M's folded dual screen design is quite different. After actual use, we still feel that this is a degree of completion. High and interesting, there are innovative mobile phones. So the protagonist we dismantled today is this Axon M with a folded dual screen form. The first step is to remove the SIM card tray without any accident.
After removing the Cato, look at the fuselage, there is no trace of screw fixation in the middle frame, and there are many pads on the back of the main screen. When you pick up, you can see the hidden screws. Note that when you screw the screws, do not There are omissions.
After the screws are unscrewed, the backplane can be removed. Insert the slits into the gaps and draw a circle along the middle frame. Because it uses a lot of screws, the backplane is not glued and can be directly dismantled. open.
We will not mention this issue for the time being. Moving on, there will be more BTB connected to the motherboard and various other cables. Please note that there should be no omissions when separating. The RF line is relatively fragile. Be careful when removing it.
The BTB on the motherboard, with its scattered parts directly exposed, has a large area and a relatively concentrated place, and it has been fixed with a fixed cover. BTB is really a bit more, carefully remove it one by one.
What is more interesting here is the design of the camera. Because the phone itself has a main and a dual screen, ZTE has only set a 20-megapixel high-resolution main camera at the top of the main screen. Click the button to switch to the secondary screen. To take a picture, the front camera instantly changes back.
Because of the use of fingerprint identification on the sides, the cable is also arranged from the side. After all the connections are disconnected, the main board can be removed easily.
Then we turn our gaze to the lower part of the fuselage, and we can see that the cover of the speaker cavity is relatively complete. It is also fixed with screws. After removing all the screws, it can be easily removed.
After removing the sound chamber BOX, the sub-panel can be seen. The size of the sub-panel is not large. The connection between the BTB and the RF cable is disconnected and can be directly dismantled. Here, the main part is completely dismantled and can be targeted at the sub-screen.
To remove the secondary screen, first remove the fixing screw of the shaft. This is similar to the design of the general notebook shaft. After the screw is unscrewed, the secondary screen can be directly removed. The main body of the shaft can be removed, and the main part of the RF cable is hidden. Traces, tight slots, securely fastened.
Because the secondary screen portion can be directly viewed as a package of a single screen module, the disassembling of the entire machine is basically completed, and a few detailed photos are added to show the Axon M motherboard design after removing the shielding mask. And workmanship.
Actually, Axon M is a very interesting mobile phone, and its degree of completion is good. It can be seen that there is a certain amount of effort in the dual screen interaction (the relevant experience can be read in our previous article). The whole machine is also quite workable. Solid, polished and sandblasted metal materials are in place. The metal texture is noticeable and the matte texture is delicate. It can be said that since the double screen folding does not achieve the design expected by a single flexible screen to complete the folding, many friends thought it subjectively. It is a mobile phone with a gimmick, but after the actual experience, Xiao Bian's evaluation of Axon M is still good. Perhaps the only pity is that the configuration is really behind some, plus the optimization of the whole machine needs to be further improved, resulting in double When the screen mode is switched, sometimes there is a noticeable click.
This dismantling will end here. If you like to dismantle digital products, or if you like to watch other people demolition and play, you are welcome to continue to pay attention to our iMobile mobile phone home, dismantling the machine next week, or according to the usual practice, Zhou said again.
For a long time, there are fewer and fewer mobile phones that can be remembered by design alone. In particular, recently, Xiaobian thinks that there are two types of mobile phones that have performed well in exploring the shape of the next generation of mobile phones. One of them is the now hot vivo APEX, with a near real full screen design and half-screen fingerprint unlocking, APEX is really quite concerned. But the real machine is too little, we can only in vivo During the media opening day, he started to experience and send out related experience articles (you can understand the students can turn over our related experience articles). As for the real machine to dismantle, Chen Chen is really unable to do it. ..
The other one is ZTE Axon M. Compared with APEX, Axon M's folded dual screen design is quite different. After actual use, we still feel that this is a degree of completion. High and interesting, there are innovative mobile phones. So the protagonist we dismantled today is this Axon M with a folded dual screen form. The first step is to start the course, of course, without accidentally removing the SIM card.
After removing the Cato, look at the fuselage, there is no trace of screw fixation in the middle frame, and there are many pads on the back of the main screen. When you pick up, you can see the hidden screws. Note that when you screw the screws, do not There are omissions.
After the screws are unscrewed, the backplane can be removed. Insert the slits into the gaps and draw a circle along the middle frame. Because it uses a lot of screws, the backplane is not glued and can be directly dismantled. open.
We will not mention this issue for the time being. Moving on, there will be more BTB connected to the main board and various other cables. Please note that there should be no omissions when separating. As the RF cable is relatively fragile, be careful when disassembling.
The BTB on the motherboard, with its scattered parts directly exposed, has a large area and a relatively concentrated place where the fixed cover is used to strengthen the fixation. BTB is really a bit more, carefully remove it one by one.
What is more interesting here is the design of the camera. Because the phone itself has a main and a dual screen, ZTE has only set a 20-megapixel high resolution main camera at the top of the main screen. Click the button to switch to the secondary screen. To take a picture, the front camera instantly changes back.
Because of the use of fingerprint identification on the side, the cable is also arranged from the side. After all the connections are disconnected, the main board can be removed easily.
Then we turn our gaze to the lower part of the fuselage, and we can see that the cover of the speaker cavity is relatively complete. It is also fixed with screws. After removing all the screws, it can be easily removed.
After removing the sound chamber BOX, the sub-board can be seen. The size of the sub-board is not large. The connection between the BTB and the RF cable is disconnected and can be directly dismantled. Here, the main part is completely dismantled and can be targeted at the sub screen.
To remove the secondary screen, first remove the fixing screw of the shaft. This is similar to the design of the general notebook shaft. After the screw is unscrewed, the secondary screen can be directly removed. The main body of the shaft can be removed, and the main part of the RF cable is hidden. Traces, tight slots, securely fastened.
Because the secondary screen portion can be regarded directly as the package of the individual screen module, the dismantling of the whole machine is basically completed here, and a few detailed photos are added to show the motherboard design of Axon M after the removal of the shielding mask. And workmanship.
Actually, Axon M is a very interesting mobile phone, and its degree of completion is good. It can be seen that there is a certain amount of effort in the dual screen interaction. (The relevant experience can be read in our previous article.) The whole machine is also quite workable. Solid, polished and sandblasted metal materials are in place. The metal texture is noticeable and the matte texture is delicate. It can be said that since the double screen folding does not achieve the design expected by a single flexible screen to complete the folding, many friends thought it subjectively. It is a mobile phone with a gimmick, but after the actual experience, Xiao Bian's evaluation of Axon M is still good. Perhaps the only pity is that the configuration is really behind some, plus the optimization of the whole machine needs further improvement, resulting in double When the screen mode is switched, sometimes there is a noticeable click.
This dismantling will end here. If you like to dismantle digital products, or if you like to watch other people demolition and play, you are welcome to continue to pay attention to our iMobile mobile phone home, dismantling the machine next week, or according to the usual practice, Zhou said again.
