Compact structure, excellent design, water temperature changes in each bucket< 0.1k, 热容量精密度和准确度符合国标要求.
Auto-adjusting water temperature (The inner barrel is 1k higher than the outer barrel temperature at the end of the line, conforms to the requirements of the national standard), the amount of water is set, and the total amount of water is automatically detected. The whole process of the experiment is automatically completed and the test efficiency is high.
With expert diagnostics, self protection, self diagnostics.
All data is measured, true, objective, and software test results are not used to change the test results.
PCI bus communication technology can be controlled by one machine, and mutual testing does not affect each other.
Powerful data processing, report statistics and printing capabilities.
How to Maintain Tested Biomass Fuel Calorific Value Equipment | Oxygen Bomb of Wood Chip Sawdust Particle Fuel Calorific Value Analyzer
In daily experiments, in addition to cleaning and drying oxygen bombs after each test, the following points should also be observed and inspected:
First, the oxygen bomb can only be twisted by hand. When the hand feels resistance, it should be stopped. Never try to use a hard twister. After the test is completed, it should be cleaned once.
Second, the cap and valve seat should be flushed and wiped after use.
Third, wash the cup clean, scrub the threads, and inspect the cup for mechanical damage. Be careful not to invert the cup.
Fourth, check the seal ring for wear and damage during combustion. If there is a leak in the seal, replace it.
Fifth, check whether the insulation pad and insulation cover are good or not, and check the insulation performance regularly.
Sixth, a 20.0Mpa hydrostatic test is conducted on a regular basis for oxygen bombs. After each hydrostatic test, the use of oxygen bombs must not exceed one year.
