This time everyone disassembled the Nokia 7 Plus which was just finished on the MWC 2018. Prior to the dismantling, he said that the focus was on dismantling. It was a collaboration between the lover and the mobile phone. From the point of view not playing in the guest video, I would like to thank the old driver Koala for the dismantling. Referring to the beginning description, the fans of the koala won't be able to pull us out again and say that we are taking a screenshot from the video.
Disassemble the first step, the bird's paper urine .. wrong, disassemble the first step is to take out the Cato honestly and properly placed.
After a simple observation we can see that the whole body is not fixed with screws, plus we know that the back cover is a one-piece metal material, so the dismantling needs to separate the screen from the front.
Although it looks like it is very simple to separate, but Xiaobian needs to be honest to tell you, because HMD quality of the glue is a bit too good, the process of separating the screen is quite difficult, we are the hot air gun + card + sucker tool together, only then finally Cut off the screen.
Do not separate directly after splitting the screen, because the screen is still connected to the back of the screen, and the BTB connector is covered with a fixed cover. If it is hard, it will only destroy one result.
After separating the screen, you can see Nokia's special metal middle shelf, which plays a role in strengthening the structure and fixing the lower components. In the era of smart machines, there are really not many mobile phones designed in this way. Some screws are passed through. This layer fixes the lower components, so there are a lot of screws here, and there are differences in the specifications between some screws. Be sure to store them carefully.
When we uncover this layer, we can see the internal structure of the mobile phone. The main body is still a standard three-part structure. However, in the process of dismantling, we found that there are still many places where the design is very meticulous.
Internal workmanship is good. Nokia 7 Plus not only retains the 3.5mm headphone jack, but this interface is still a separate component, this design can be said to be quite rare. The back of the motherboard is fully covered with a shield cover, workmanship is very detailed. Here are still One characteristic is that some parts that are inconvenient to use the fixed cover are not allowed by Nokia. Instead, they use a separate screw to fix this special design. It can be said that it takes great pains to structure.
Show the material of the metal back cover. Although the back of the machine doesn't feel like metal at all, it is actually formed by using an aluminum alloy in combination with other materials. This design is mainly to ensure good signal overflow capability. In order to cover the seams between the different materials, there will be the birth of a 6-layer paint back cover.
Finally, let's take a look at the screen panel. Compared to the screen assembly of other mobile phones, the Nokia 7 Plus can be said to be a single display, which is slim and fragile. It's going to hang up... Once again, we strongly warn students that you should never try to disassemble yourself. It's really easy to cause damage.
This dismantling will end here. If you like to disassemble or enjoy watching the teardown process, welcome to continue to pay attention to our iMobile mobile home. We will strive to bring you more and better content. As for the next dismantling Product, let's leave it to the next time.
This time everyone disassembled the Nokia 7 Plus which was just finished on the MWC 2018. Prior to the dismantling, he said that the focus was on dismantling. It was a collaboration between the lover and the mobile phone. From the point of view not playing in the guest video, I would like to thank the old driver Koala for the dismantling. Referring to the beginning description, the fans of the koala won't be able to pull us out again and say that we are taking a screenshot from the video.
Disassemble the first step, the bird's paper urine .. wrong, disassemble the first step is to take out the Cato honestly and properly placed.
After a simple observation we can see that the whole body is not fixed with screws, plus we know that the back cover is a one-piece metal material, so the dismantling needs to separate the screen from the front.
Although it looks like it is very simple to separate, but Xiao Bian needs to tell you honestly, because the quality of HMD glue is a bit too good, the process of separating the screen is very difficult, we are the hot air gun + card + sucker tool together, before finally Cut off the screen.
Do not separate directly after splitting the screen, because the screen is still connected to the back of the screen, and the BTB connector is covered with a fixed cover. If it is hard, it will only destroy one result.
After separating the screen, you can see Nokia's special metal middle shelf, which plays a role in strengthening the structure and fixing the lower components. In the era of smart machines, there are indeed many mobile phones designed in this way. Some screws are passed through. This layer fixes the lower components, so the screws here are particularly concentrated, and there are differences in the specifications between some screws. Be sure to store them carefully.
When we uncover this layer, we can see the internal structure of the mobile phone. The main body is still a standard three-part structure. However, in the process of dismantling, we found that there are still many places where design is very hard.
Internal workmanship is good. Nokia 7 Plus not only retains the 3.5mm headphone jack, but this interface is still a separate component, this design can be said to be quite rare. The back of the motherboard is fully covered with a shield cover, the workmanship is quite detailed. Here are still One feature is that some parts that are inconvenient to use the fixed cover are not allowed by Nokia. Instead, they use a separate screw to fix this special design. It can be said that it takes painstakingly for the structure to be reliable.
The material of the metal back cover is shown. Although the back of the machine does not feel like metal, it is actually formed using an aluminum alloy and other materials. This design is mainly designed to ensure good signal overflow capability. In order to cover the seams between the different materials, there will be a six-layer paint back cover.
Finally, let's take a look at the screen panel. Compared to the screen assembly of other mobile phones, the Nokia 7 Plus can be said to be a single display, which is slim and fragile. When it is vulnerable to disassembling, we accidentally put it. It has hung up. Once again, it strongly warned the students that they should never attempt to disassemble themselves. It is very easy to cause damage.
This dismantling will end here. If you like to disassemble or enjoy watching the teardown process, welcome to continue to pay attention to our iMobile mobile home. We will strive to bring you more and better content. As for the next dismantling Product, let's leave it to the next time.
