|
Zhimi Pure Humidifier adopts the design of power-on-water separation. The main body is roughly divided into two parts. The above is mainly used for the discharger assembly, and the lower part is the water tank. The whole humidifier is mainly white, clean and tidy. It supports 240ml/h humidification efficiency, and adds water by means of water injection. The final price is 499 yuan. After roughly disassembling the humidifier, this is what it looks like. Huge gears are placed in the lower half of the water tank to accelerate evaporation. This is the upper part of the humidifier water inlet, directly from here to the humidifier water, do not need to split, it touches a lot of convenience. The upper part of the controller, located next to the water inlet, is a compact panel with only two buttons to operate. In addition, the smart meter humidifier can also be connected to the phone via WiFi. The upper part of the box body structure, which is driven tank in the gear. Upper part of the box body structure. The upper part and the water tank are connected by these two contact points. If the airframe and the water tank are separated, the humidifier will stop running automatically to prevent the internal fan from hurting the finger. The lower part of the tank, which has a large gear structure, or rather should be called the evaporation plate, used to speed up the evaporation of water vapor. Tank bottom structure, there are four small claws. Evaporator inside the tank to a close-up. The basic structure is like this, the above gear can theoretically be disassembled. Zhimi pure humidifier has a temperature and humidity sensor, vents, and power cord on the back. The whole humidifier white tone-based, clean and tidy.It supports 240ml / h humidification efficiency, and the way water on the water, the final price of 499 yuan.
|
