Cologne, Germany, March 5, 2018: Through the use of Nordson Corporation's advanced melt filtration system, Cyklop, an international supplier of industrial fixed packaging systems for goods, can increase productivity, reduce downtime, and reduce the need for packaging PET straps. The waste of materials.
Cyklop GmbH's factory in Cologne, with the recently launched BKG® HiCon ™ The V-3G system replaces the older, hydraulically driven backwash screen changer Cyklop reports that the new screen changer reduces operating costs because it requires 30% fewer backwashings and 40% less frequency changers According to plant manager Bernd Causemann, using the HiCon V-3G system in production lines at 450-550 kg / h, flow and melt pressures can be kept constant to ensure product quality consistency.
Cyklop extrusion line BKG® HiCon ™ V-type 3G screen changer
'BKG HiCon V-3G Screen Changers require less maintenance and operator supervision than older Nordson systems or similar vendors' backwash systems. "Mr Causemann said the higher efficiency of the V-3G network changer means that the anti- With less flushing and less material waste, the system is exceptionally good at dealing with the surge in pollutants because the filtration zone will be replaced in a short period of time.
In the BKG HiCon V-3G screen changer, the melt flow from the extruder is split on the inlet side and directed to four filter chambers on the two screen support plungers, each filtered The location of each pair of filtration chambers allows for the filtration of the respective melt flow until the plunger removes a filtration chamber from the process to remove accumulated contaminants by backflushing.In a conventional operation, After all four filtration chambers, the other three (or 75%) are still in production while the filter screen of one of the filtration chambers is being replaced or rinsed, leaving the capacity uninterrupted.
The backwash cycle is automated. In addition to the two plungers used to support the screen, there is also a hydraulically driven plunger that runs during backwash. When the pressure difference across the screen changer is increased due to accumulation of contaminants At the preset level, the backwash sequence will automatically start for all filter chambers. The corresponding plunger for each filter chamber will retract and create a storage chamber for the filtered polymer melt. These materials will Compression is carried out hydraulically and then discharged from the opposite direction, back through the filter, which removes contaminants from the system. This sequence of operations is performed for each filter chamber one by one.
Cyklop Plant Manager Bernd Causemann
"The new HiCon V 3G changer offers a 30% reduction in height compared to previous V-systems for a lower extrusion height." Christian Schroeder, Global Product Manager, BKG Melt Conveyor Products, says' only A plunger is required for backwashing, eliminating the need for a plunger for each filter chamber; hydraulic lines are also optimized.
Cyklop International offers a complete cargo fixed industrial packaging system including machinery and consumables for covering, bundling, bundling, labeling and coding.