Nightmare level challenge | 4 trick teach you Spring Festival to defeat the hood

There are a few days is the Spring Festival, the New Year new atmosphere, of course, a new year to meet with a new look, and ultimately clean the house and a variety of household appliances clean cooking delicious ingredients, Three meals a day Gas stoves and hoods contributed.Over time use, A long time dealing with fumes Hood attached to a thick layer of grease on the surface, seriously affecting the net absorption effect.Today, the author of the most common Chinese hood as an example, to teach you to get four deep cleaning hood.

The whole process of cleaning the hood can be divided into four steps: Prepare tools , Remove parts , Clean the screen and rotor , All back Workmanship must first sharpen its tools, you want to easily complete the task of cleaning also need to use special tools, as shown below, such as screwdrivers, steel balls, dish cloths, cleaning agents, brushes, gloves and masks Wait.

PS.Hot water to the oil effect is very good, the higher the water temperature, the faster the water molecules move, while the fat into a molten state at high temperatures, decreased binding force with the surface of the vessel, cleaning up is very easy. Soot hood dedicated detergent, the supermarket has sales, the price is generally about ten yuan.

● Preparation

Boil the water with a boil to keep boiling, turn on the hood, due to high-temperature steam fumigation, the oil droplets attached to the filter will slowly melt and flow into the collection cup, so you can simplify the back of the cleaning work, and heat Water will not be wasted, and will be of great use in the back.

● Remove

First, turn off the power of the hood! Wear a mask, remove the oil cup (oil collection cup generally used snap design, light push to remove), pour off the accumulated oil, aside for the wash. Under the fixed filter screw, usually 3 to 4, when the screw is sure to use one hand holding the filter to prevent falling. Removed, wrapped with plastic bags filter, placed next to.

Continue to dismantle the work, remove the three screws fixed coarse filter, wrapped with plastic bags inside the wind wheel is a large screw fixed, hand rotation can be unscrewed (if the skid can be used Tissue the nut and then tighten), wrap it in a plastic bag.

Next, the hood special detergent debut, put on masks, spray it in the plastic bag has just been wrapped mesh, wind wheels and other components, even after the spray finished, the plastic bags sealed together.

Then hood hood and the bottom of the hood is also sprayed again, spray evenly, quickly left the kitchen, out of breathable gas, by the way, take a break, wait about ten minutes to go in and start.

This article belongs to the original article, if reproduced, please indicate Source: Nightmare-level challenge four strokes teach you Spring Festival to defeat the hood http://jd.zol.com.cn/678/6784231.html

● cleaning

In fact, the process is to wait for the detergent to completely disintegrate the oil attached to the surface, similar to washing clothes soak for a while and then wash the effect will be better with a good mask, gloves, into the kitchen ready to clean different components the best choice of different Tools, such as cleaning dishes with a dishwashing cloth; and filters can be used steel ball or brush to clean; coarse filter for the stainless steel, steel wire ball can be used for cleaning; wind wheel surface without oil coating, So it is best to wash with a dishcloth.Oil soaked and disintegrated by the detergent becomes easy to clean, oil is easily washed off without too much effort.

Wash all the parts in turn under the faucet rinse again, just burning the boiling water is now warm and not hot, while hot into the sealed sink, all the components into the soaking, thoroughly heated in a dishwasher with water Cleaning, finally to the grease 'fatal blow' just disintegrated detergent and then assisted by the washing of hot water, filters, wind wheels and other moments of a new look.

The hood and the wall of the fume hood can be cleaned with a dish cloth and a steel wire ball, scrubbing with a large area of ​​the dish cloth first, and then using a steel wire ball to clean the stubborn stains that are hard to remove. Here, When cleaning the hood body and wall hard to light, to prevent scratching the surface.

Will clean the filter, wind wheel and other components placed in ventilated place to dry, waiting for back.

● back to loading

So far, the cleaning work of the hood is basically over, and then the various components in turn can be successfully completed.I suggest that, in order to facilitate the next cleaning and maintenance, before the backpacking, you can use a paper towel to wash, each Parts wipe, smear it again, the surface will form a layer of 'protective film', until the next cleaning will be more relaxed.

Soot deep cleaning work completely completed, plug-in boot, is not feeling the wind has become even greater!

Review the entire disassembly and cleaning process, there are several points need special attention:

1, first hot water fumigation, and then wash with hot water, can make the entire cleaning work more efficiently;

2, remove the hood must first cut off the power;

3, full gloves, spray detergent must be sure to wear a mask;

4, before loading, it is best to wash the surface of the unit with a layer of food, the next cleaning easier.

● big trick: use the dishwasher to clean

Finally, there is a secret to give to you, put this big move need special weapon - dishwasher, this is mainly for friends who have a dishwasher at home. Dishwasher can not only so simple dishwashing, Wash hood filter that is also the lever!

Disassembly work consistent with the previous article, but the cleaning work on the dishwasher to complete all the components in turn into the dishwasher, placed, select heavy oil washing program (or strong mode), water temperature settings For the highest, about an hour to get.

Why the dishwasher can also be washed so clean? This is because the dishwasher by high temperature, high pressure water washing, high temperature completely dissolve the stains, high pressure for stubborn stains have a good cleaning effect, rotating water to achieve 360 ​​° erosion, To achieve No dead ends Deep cleansing effect, especially the cleaning of wind blades into blades, dishwasher is simply called artifact.

Write in the end

Here, the cleaning tutorial of this article is coming to an end. After reading this article, in fact, the cleanliness of the hood is not as strenuous as we imagined, but no need to pay people, own tools at home, just two hours Can get, in the normal use of the process of daily cleaning and maintenance work, hood cleaning is not difficult, of course, the election method is critical, two hours of work in exchange for a new look hood and suction, to welcome the arrival of the new year , DIY work experience the joy of work, can be considered worth!

This article belongs to the original article, if reproduced, please indicate Source: Nightmare-level challenge four strokes teach you Spring Festival to defeat the hood http://jd.zol.com.cn/678/6784231.html