| Recently, Rhode Island's pipe system components manufacturers use 3D printing technology Production of small static mixer.  After Westfall Manufacturing understands customers' demand for low water pipe static mixers 3050 in the 1 'to 5' range, the company turns to 3D printing Westfall has been using durable nylon print patented mixers, which are then glued into PVC tubes. Low Water Pipe Static Mixer 3050 is designed to limit the flow resistance of the pipe system.This resistance, known as water flow loss, is said to have been reduced by two to four times in the Low Water Pipeline Mixer Model 3050 thanks to four cones And curved blades designed to be precisely geometrical and welded inside the pipe to reverse flow for rapid mixing of liquids or gases.The mixer can be used for municipal and industrial water and wastewater treatment, petroleum, natural gas, propane and Biofuels processors provide important solutions. Engineers at Westfall know that 3D printing can be done without hesitation, as long as the geometry of the blade remains the same, maintaining the performance of the pipe static mixer 3050. The durable nylon blade can withstand loads from caustic to natural gas and petroleum Chemicals. In addition to nylon, these inserts can be printed with materials such as Kynar and stainless steel. Westfall said using 3D printing technology has increased its manufacturing capabilities, which means that customers are limited to ordering smaller size static mixers and even more Benefit from faster, more cost-effective delivery. Source: 3D Tiger |
 |
|