How much biomass calorific value can be achieved with the sawdust granulator? How is it produced? What are the characteristics? Applications?
First, the process of biomass fuel particles:
Biomass fuel pellets are mainly made of agricultural and forestry residues, sliced, crushed, mined, refined, sieved, mixed, softened, tempered, squeezed, dried, cooled, checked, and packaged. It is a kind of clean and low-carbon renewable energy.As a fuel for biomass burning equipment, such as biomass burning machine and biomass burning stove, it burns for a long time, enhances the combustion, the hearth High temperature, but also affordable, pollution-free environment, is a good alternative to conventional fossil fuels environmentally friendly fuels.
Second, the characteristics of biomass fuel particles:
1. Green Energy Clean & Environment Friendly: Smokeless and odorless, clean and environment-friendly. Its sulfur content, ash content and nitrogen content are much lower than those of coal and petroleum. It is a clean and environment-friendly energy source, Reputation.
2. Low cost and high added value: the cost of using is far lower than that of petroleum energy, which is a clean oil generation oil advocated by the state and has a vast market space.
3. Increased density storage and transportation convenience: Molding after forming a small size, large proportion, density, ease of processing conversion, storage, transportation and continuous use.
4. Energy efficient: high calorific value, 2.5 to 3 kg of wood pellet fuel calorific value is equivalent to 1 kg of diesel calorific value, but the cost is less than half of diesel, burning up rate of up to 98%.
5. Wide range of applicability: Molding fuel can be widely used in industrial and agricultural production, power generation, heating and heating, burning boilers, cooking, family units are applicable.
Third, the biomass fuel particles Application:
Instead of the traditional diesel, heavy oil, natural gas, coal and other petrochemical energy, as a boiler, drying equipment, heating furnace and other thermal equipment fuel.
Made of wood particles, the low heat value of 4300 ~ 4500 kcal / kg.
Fourth, how much calorific value of biomass fuel particles can be achieved?
For example: a variety of pine (Pinus, white pine, Pinus sylvestris, fir, etc.), hardwood (oak, catalpa wood, elm, etc.) for 4500 kcal / kg;
Soft wood (poplar, birch, fir, etc.) is 4300 kcal / kg.
The lower heating value of straw particles is 3000 ~ 3800 kcal / male,
Beans, cotton stalks, peanut shells 3800 kcal / kg;
Corn, rape straw 3700 kcal / kg;
Straw for 3500 kcal / kg;
Straw for straw 3400 kcal / kg;
Rice straw is 3000 kcal / kg.
