In the fourth quarter of 2016, Xiaomi released 'Xiaomi Mobile Power 2 10000mAh' and Xiaomi Mobile Power 20000mAh ', replacing the first generation mobile power family product line a few years ago. In the past year, the market response has been very good. High energy Lightweight and very cost-effective makes these two products sales rising steadily.
September 2017, millet updated 20000mAh models, the new name is 'millet mobile power 2C' remained unchanged at 149 yuan, followed by renewed in December 10000mAh models.
The new name directly into the 'new millet mobile power 2', the same price as the old maintenance of 79 yuan.
Next, we will carry out a detailed dismantling, to see what changes this new product in the end.
Unboxing:
New millet mobile power 2 Simple white paper box, printed with the product design, the following is the product name: 'New millet mobile power 2' (10000mAh).
The back of the product parameters page, the name of the product: the new millet mobile power 2 (10000mAh), product model: PLM09ZM, battery energy: 10000mAh 3.7V (37Wh), rated capacity: 6500mAh 5.1V (Typ 1A) Interface: USB-A, input parameters: 5V2.0A / 9V2.0A / 12V1.5A, output parameters: 2x 5.1V2.4A / 9V1.6A MAX / 12V1.2A MAX, the product size: 147 x 71.2 x 14.2mm, Manufacturer: Jiangsu Purple Rice Electronic Technology Co., Ltd.
Product out of the box items at a glance: mobile power supply body x1, MicroUSB data cable x1, manual x1.
All millet mobile power in the interface panel will be glued to a layer of dust protection stickers, this new millet mobile power 2 is no exception.
For the sake of comparison, the two old and new products are on the left. The black one on the left is Xiaomi Mobile Power 2 which was launched in 2016, and the new Xiaomi Mobile Power 2 on 2017 is silver on the right. The old height is 130mm, the new height is increased to 147mm, the two side by side the old height was significantly shorter.
The old width of 71mm, the new width of 71.2mm, both in the width of only 0.2mm difference in appearance can not tell.
Weighing the weight of both through the electronic scale, the old weight of 218g, the new weight of 240g, the new heavier than the old 22g.
Another big difference between the old and new is the panel interface, the old only provides a single input and single output, and the new one to do a single-input dual output, more convenient for use in multiple devices.
First look at the parameters of the old nameplate, enter: 5V2.0A 9V / 12V 18W, output: 5.1V2.4A 9V / 12V 15W MAX, battery energy: 10000mAh 38.5Wh, rated capacity: 6900mah, cell discharge voltage: 3.85 V, conversion rate: more than 90%.
Take a look at the new nameplate parameters, input: 5V2.0A 9V2.0A 12V1.5A, output: 2x 5.1V2.4A 9V1.6A MAX 12V1.2A MAX, battery energy: 10000mAh 37Wh, rated capacity: 6500mAh, cell discharge are Pressure: 3.7V, brand name parameters are not marked conversion rate, but in the leaflets information related description 'board end conversion rate over 90%' .It should be noted that the board efficiency and USB port efficiency are two different parameters , USB port because it has to go through a variety of components and contact pressure drop, so the measured value of the USB port efficiency is generally 1% -3% lower than the board side.
Both because there is no significant difference between the width of the grip is exactly the same sense of the same, with the phone with the new phone will grow a bit more.
The new millet mobile power 2 material is the same as the previous generation of aluminum, black and silver colors available, aluminum sandblasting anodized, with a milky gravure LOGO 'mi' on the surface.
Interface Panel New millet mobile power 2 uses two conventional USB-A output interface, support for conventional fast charge output (QC2.0); output using a common MicroUSB interface, also supports conventional fast charge output, led indicator placed on the input Below the interface, the right is the switch activation button, but also supports Xiaomi unique short-press on-off control, fast double-click the small current mode.
Can be seen in the output jack, the plug with millet LOGO 'mi' on the plug, the two LOGO a little difference should be different batches, millet customized USB-A female, can be used as a security mark, true and false Judgment based on one.
Use the Power-Z FL001 USB Tester introduced by ChargerLAB, a charge-focused charging area, to recognize and poll the output of the new Millet Mobile Power 2, the new Millet Mobile Power 2 dual USB-A output interface, when plugged into a single device, All ports support blind pluggable to provide 9V / 12V Qualcomm QC2.0 fast charge output. When two devices are inserted, fast charge mode will be shielded. Both USB-A output ports will operate in 5V output mode to avoid device damage. Standby voltage on the two output port is a little different, the outermost output standby voltage is 5.13V, the inside output standby voltage is 4.97V.
