The current disassemble time again, the protagonist of this issue, this is only the life of the monster 360 N6, we have to demolish a demolition, see 360 in the end is how to increase the relative thickness of the smaller case of 5030mAh A giant battery it.
The first is to take the opportunity to take care of Cato, after all, are all integrated design, the good habits or continue to maintain it.
Back cover is the use of dark buckle fixed with the pry piece cut into the corner, homeopathic strokes can be opened apart, be careful when the back of the fingerprint identification cable, the design of the fixed cover just a short cut did not cover this BTB, is 360 for disassembly convenient deliberately.At the same time can be seen from here, the back cover is the middle of the metal, both ends of the plastic, while the plastic part of the direct printing of some antennas, the lines really there is no time Seen it.
Motherboard can see a fixed cover and shield cover a larger area, the top of the thermal sheet attached to the vacant position is obviously reserved for another camera in the double camera program, it seems N6 motherboard is born directly The motherboard of the N6 Pro was designed with screws and holes in place.
Separate all the screws and cables, pay attention to the front camera cable is partially obscured, may miss, the RF cable must also be careful separation.
Small plate parts, only three screws, do not worry confusion .There are fragile board affixed to the small screws, the upper part of the motherboard but not, what is this idea.
In order to leave enough space for the battery, the sound chamber and small plates are more narrow, plastic back fixed, tilt platelet careful not to spicy flowers, it is recommended not to force the long side, the board is too narrow, easy to fold. The vibrator is located in the lower part of the whole machine, and the mobile phone in the state of holding the handset vibrates in a relatively obvious manner. The vibration has the general sense of touch and is cold and dry.
Motherboard parts of the position of the main chip shield disassembled, you can see the main heating parts are coated with grease, the cooling seems 360 did not fall, although the overall appearance of the general, but the internal work can be seen is the heart of.
Photo family portrait, you can see very few scattered devices, it can be said this year, demolished the best demolition of one of the cell phone, disassemble and restore the difficulty is relatively low, screws do not have to worry about confusion, Xiaobian this is a goldfish, memory Only 7 seconds, can be said to be very friendly.
Can be seen after the disassemble, 360 N6 overall work is quite good, at a reasonable price for everyone to provide a reliable choice.In order to give up the big battery, N6 overall plan obviously made adjustments, narrow and small Board design gives way to the battery, the reduction of the speaker sound unit in exchange for battery capacity, and the volume of the loud speaker has not been greatly affected, the whole solution is still more successful.But the dual camera position directly leave empty, which inevitably Too cynical some - but then I thought, since the design is used N6 Pro, which represents the N6's internal work, in fact, a higher level of the N6, it can be considered some comfort.
Finally, the practice of advertising, here is the phone home, welcome to disassemble and look at others disassemble friends continue to pay attention to the next phase of dismantling is what technology products, so stay tuned.
The current disassemble time again, the protagonist of this issue, this is only the life of the monster 360 N6, we have to demolish a demolition, see 360 in the end is how to increase the relative thickness of the smaller case of 5030mAh A giant battery it.
The first is to take the opportunity to take care of Cato, after all, are all integrated design, the good habits or continue to maintain it.
Back cover is the use of dark buckle fixed with the pry piece cut into the corner, homeopathic strokes can be opened apart, be careful when the back of the fingerprint identification cable, the design of the fixed cover just a short cut did not cover this BTB, is 360 for disassembly convenient deliberately.At the same time can be seen from here, the back cover is the middle of the metal, both ends of the plastic, while the plastic part of the direct printing of some antennas, the lines really there is no time Seen it.
Motherboard can see a fixed cover and shield cover a larger area, the top of the thermal sheet attached to the vacant position is obviously reserved for another camera in the double camera program, it seems N6 motherboard is born directly The motherboard of the N6 Pro was designed with screws and holes in place.
Separate all the screws and cables, pay attention to the front camera cable is partially obscured, may miss, the RF cable must also be careful separation.
Small plate parts, only three screws, do not worry confusion .There are fragile board affixed to the small screws, the upper part of the motherboard but not, what is this idea.
In order to leave enough space for the battery, the sound chamber and small plates are more narrow, plastic back fixed, tilt platelet careful not to spicy flowers, it is recommended not to force the long side, the board is too narrow, easy to fold. The vibrator is located in the lower part of the whole machine, and the mobile phone in the state of holding the handset vibrates in a relatively obvious manner. The vibration has the general sense of touch and is cold and dry.
Motherboard parts of the position of the main chip shield disassembled, you can see the main heating parts are coated with grease, the cooling seems 360 did not fall, although the overall appearance of the general, but the internal work can be seen is the heart of.
Photo family portrait, you can see very few scattered devices, it can be said that this year, demolished the best demolition of one of the cell phone, disassemble and restore the difficulty is relatively low, screws do not have to worry about confusion, Xiaobian this is a goldfish, memory Only 7 seconds, can be said to be very friendly.
Can be seen after the disassemble, 360 N6 overall work is quite good, at a reasonable price for everyone to provide a reliable choice.In order to give up the big battery, N6 overall plan obviously made adjustments, narrow and small Board design gives way to the battery, the reduction of the speaker sound unit in exchange for battery capacity, and the volume of the loud speaker has not been greatly affected, the whole solution is still more successful.But the dual camera position directly leave empty, which inevitably Too cynical some - but then I thought, since the design is used N6 Pro, which represents the N6's internal work, in fact, a higher level of the N6, it can be considered some comfort.
Finally, the practice of advertising, here is the phone home, welcome to disassemble and look at others disassemble friends continue to pay attention to the next phase of dismantling is what technology products, so stay tuned.
