Many companies have a large number of applications for recycled plastics in the product above, but we are also in the use of recycled materials there are a few points to note, for this one or several times of no impurities, and no decomposition of abs regeneration It is generally not mixed with other new materials to be used. The main purpose of doing so is to prevent chromatic aberration.
It is toxic like this ABS plastic, but its toxicity is not great. For this situation, we can adopt this measure, not only with a mask, but also with two masks, inside the layer we can With a dry, outer layer of mask we can use water to wet, so that it can be very good to prevent toxic substances into our mouth. In theory abs plastic itself is not toxic, unless manufactured in order to achieve Some special requirements, adding a large number of plastic additives have greater toxicity, and ABS is an engineering plastic, in our daily life will be used in some appliances, cars, etc., like the basin, plastic bowl, fresh Membrane with PS, PP, PE and so on.
From the appearance of ABS is mainly opaque and was a line of ivory particles, its product color can be said to be colorful, but also has a very high gloss ABS relative density of about 1.05G / CM3 or so, the water absorption rate is low. ABS with better adhesion of other materials, the surface printing, coating and coating have a good performance.
ABS oxygen index is roughly 18 to 20, are flammable polymers, the flame is mainly yellow, accompanied by black smoke, and will send a more special smell. If you want to learn more about ABS plastic other relevant information, please pay attention Global Plastic Network Information Channel.