From January 23-26, 2018, Arburg will showcase its high-speed thin-wall applications for the packaging industry at Interplastica 2018 in Moscow, Russia.
A Packaged Edition Hybrid Allrounder 570 H with a clamping force of 1800 kN will demonstrate the performance benefits of the Hidrive hybrid injection molding machine line by producing four in-mold labeled (IML) buckets in a cycle time of approximately 1.9 seconds .
The unit will use polypropylene (PP) material to produce four IML buckets with a wall thickness of only 0.32 mm in about 1.9 seconds, weighing 3.55 g per container and a capacity of 150 ml. To this end, Brink supplies molds and automation systems for embedding IML tags, removing and stacking finished part components, processing more than 26 kg of material per hour.
Thin-walled in-mold labeling (IML) barrels with a wall thickness of only 0.32mm
Arburg offers its customers reliable, technical advice and efficient machine technology for high-quality, high-volume production of packaging products, especially in the packaging industry where fast, high quality and high-volume production are required, with regard to precision and short cycle times The time was so high that it was Arburg's advantage of a 4600 kN maximum clamping force for a series of high-speed, high-speed Alldrive and Hidrive electric and hybrid high-performance injection molders packed in packages that were optimized Features include: rod spacing, clamping force, mold opening and injection unit, and finite element analysis of the optimization of the installation of templates. In addition, the position adjustment barrier screw servo electric ingredient driven to achieve a high filling dynamic and short injection Time, the servo motor with energy recovery elbow-type clamping unit to achieve rapid braking.