The BMR480 is available in industry-standard, low-profile 1/4 brick format and measures only 58.4 x 36.8 x 12.19mm (2.30 x 1.45 x 0.48in); operates over a wide input voltage range of 40V to 60V and delivers 10.4V, Pre-programmed outputs such as 12V and 12.5V are tightly regulated (± 2.5%) but can be configured to any voltage between 9V-13.2V at the factory.
The BMR480 module incorporates Flex's leading mixed slew rate (HRR) technology to make better use of the powertrain for high-power conversion over its wide input voltage range. In addition, for applications that operate at high ambient air temperatures Application, the module offers typical performance and offers up to 97% power conversion efficiency at 53V and half load while maintaining low power consumption.
The new BMR480 power modules are not only suitable for Intermediate Bus Conversion (IBC), Dynamic Bus Voltage (DBV) and Distributed Power Architecture (DPA), but also for high-end and high-power applications or multi-cell battery powered applications or ICTs Technology) rectifier applications commonly used in power supply.Other important markets include networking and telecom equipment, industrial equipment and server and storage applications.
The BMR480 offers higher available power in environments with high ambient temperatures and limited air flow, meaning it provides high reliability. Although the module has a standard backplane, it can also be connected to the most challenging thermal environments To the radiator or cooling plate.
Key features for power designers and power system architects include dynamic load compensation and support for the latest PMBus communication specification (version 1.3) and Ericsson Power Designer software tools Other product features of the BMR480 include Droop load sharing, 1500V input / output isolation, monotonic startup, remote control, and a range of protection features including over-temperature, output short-circuit, and output overvoltage.
'The new BMR480 module addresses the needs of customers based on industry-leading power system design and architecture development solutions. "Olle Hellgren, director of business and product management for Flex Power Modules, said:' This new advanced bus converter handles very large The power envelope and peak currents up to 96A provide many different levels of power, efficiency and excellent thermal performance.
Manufactured on the basis of the highest manufacturing standards the company has set for many years, the Flex power modules offer ultimate reliability and confidence to major customers.