The car is fully integrated into our life, but there are a few issues with the use of the car, and today we talk about the most common and important part - the brake pad.
Here are some common faults under the brake pads:
1. tremble when brakes
This situation should still fairly common, because the brake disc surface roughness has a certain degree of misalignment caused by brake on the shake, this mainly depends on whether the original brake pads, brake disc wear, if Braking is not particularly obvious to continue to use, but especially serious when checking the replacement of these two parts.
Brake deviation
This situation is rare, the main reason is that brake system brake pump around the uneven force or brake pad partial wear caused,
Due to the fast rotation of the brake disc during driving, the difference between the acting speed of the branch pump and the quick friction is very small and hard to feel. However, when the vehicle is stopped, the feeling is obvious. Brake, which led to inconsistencies on both sides. At this time should check the brake cylinder and brake pipe.
3. Brake does not return
This phenomenon is that after depressing the brake pedal, the pedal does not return to its original position or relatively slowly. The reason for this phenomenon is mostly because the manifold piston is stuck due to the dirt, so long as the piston of the manifold is processed, After handling the brake line, the air inside the brake fluid must be drained cleanly.
Brake soft
Brakes soft phenomenon is very common, many owners reflect their car has this phenomenon, this phenomenon is due to lack of brake oil, brake discs are relatively thin, there are air in the brake pipe, brake oil deterioration and so on. One of the most common is the brake fluid deterioration and lack of brake fluid.
Brake hardens
There will be brake soft braking hard to get the problem, and often encounter this problem is the driver of the woman, the main reasons for the brake hardened vacuum booster brake failure caused by no help, frequent brakes or brake pedal lower items card Live caused.
Bounce on the brakes
This situation is more common when the brake pedal brake pedal rebound top of the phenomenon, causing this phenomenon due to the role of ABS car, brake disc, brake surface uneven, steel ring deformation.
7. Brake abnormal sound
Brake noise is mainly the vehicle driving the brakes, the brake system will issue a sharp metal friction (very jarring), it may be because the brakes thinning, brakes quality times, there are foreign body brake pads or brakes Rust and other lead, in general, a few foot brake noise will ease.
Brake failure
Brake failure is a very serious problem for the car, under normal circumstances is not the phenomenon of brake failure, unless the car appeared some quality problems or brake system failure. Needless to say, the reasons for failure, brake failure and more related to the quality of the car.
Of course, this kind of thing who do not want to run into, but in case of such a situation such as how to emergency? First of all, according to the speed of the car to control the direction and gradually reduce the use of Take full advantage of the engine brake, the speed gradually pulled down when the speed is lower than 60KM / H can be considered when using hand brake to slow down (speed too high prone to accidents).
In addition to making these moves, you can also use the railings or walls of your body and the road to reduce friction. You must be careful not to wait until the speed is relatively low.
