Biomass pellet machine is based on crop straw or wood chips as raw material, after the biomass particle machine pressed into a granular fuel, where Xiaobian for everyone to introduce the impact of biomass particle machine life What are the factors:
1, the material of the water is too low, the hardness of processed products is too strong, processing equipment, power consumption, increased production costs, reduce the use of biomass particle machine life. The number of impacts, and at the same time due to the friction of the material and hammer blows to produce heat, so that processed products within the water evaporation, evaporation of water and crushed powder to form a paste and plug the sieve, reducing the biomass particle machine row The raw materials such as cereals, corn stalks and other crushed products are generally controlled below 14%.
2, at the end of the material crushing, will be a little wheat mixed with edible oil and put into the machine, press 1-2 minutes after the shutdown, so that the biomass particles machine mold hole filled with oil so that the next boot will be able to feed production , Both maintenance molds, but also save hours. Biomass pellet machine after the release of loose roller adjustment screw, and remove the residual material.
3, can be set in the biomass particle machine feed chamber permanent magnet, or in addition to iron, so as not to affect the pressure wheel, mold and the central axis of the life of the particles in the extrusion process temperature up to 50-85 ℃, and pressure The wheel is subjected to strong power during operation, but lacks the necessary and effective dust protection device. Therefore, it is necessary to clean the bearing every 2 to 5 working days and add high temperature grease. Every month cleaning and refueling once, gear box interval will be cleaned and maintenance for six months, the transmission part of the screw fastening replacement should be carried out at any time.
