Specification for construction of pvc board for plastic products
Materials, equipment and tools
1. Construction materials should meet the following requirements:
The physical and appearance dimensions shall conform to the requirements of the General Specification for "Anti-static Veneer" SJ / T11236 and have permanent antistatic performance. The volume and surface resistance: The resistance value of the conductive type plywood shall be less than 1.0 × 106 Ω.
(2), conductive adhesive: should be non-water-soluble glue, the resistance value should be less than the resistance value of the panel, bond strength should be greater than 3 × 106 N / m2
(3), plastic electrode: should be uniform color, the same diameter, flexible and good material.
(4), conductive wire with copper foil: thickness should not be less than 0.05mm, wide should be 20mm.
2. Plywood should be stored in a ventilated and dry warehouse, away from acid, alkali and other corrosive substances. Handling should be light loading and unloading, is strictly prohibited violent impact. Is strictly prohibited outdoor sun and rain.
3. Commonly used construction equipment (including tools) should include slot machines, plastic welding torch, rubber hammer, knife, ruler
Second, the general provisions
1. Anti-static PVC (pvc) ground construction content, including grass-roots processing, grounding system installation, glue configuration, anti-static PVC (PVC) plywood (hereinafter referred to as the board) shop and cleaning and other construction, testing and Quality inspection.
2. Construction site temperature should be between 10 - 35 ℃; relative humidity of not more than 80%; ventilation should be good and to ensure that other indoor construction projects should have been basically completed.